Start by explaining who the conditioner is for and how it will be used.
A lightweight rinse-off conditioner for fine hair has a different development brief from a rich conditioning product for dry, coarse hair. A leave-in product also needs its own formulation and evaluation approach.
Tell the manufacturer about:
Ask whether the project can begin with an existing formula, requires adjustments to a base formula, or needs custom development.
These options may involve different costs, sample rounds and schedules. Agree on the development scope before requesting a final quotation.
A useful question to ask:
“Which formula approach would you recommend for this brief, and what would need to be developed or adjusted?”
A sample should be assessed against your product brief. Fragrance and appearance are useful observations, but they do not provide a complete picture of conditioning performance.
Combing response is an established area of haircare evaluation. Published research has examined instrumental combing measurements alongside sensory assessment, supporting the value of evaluating performance through defined methods. Study on the Evaluation Method for the Combing Force of Human Hair
For a practical buyer review, use consistent conditions where possible and record the sample version.
| Evaluation area | What to record | Question for the manufacturer |
|---|---|---|
| Texture and application | Spreadability and ease of distribution | Can the texture be adjusted without changing the main product direction? |
| Wet detangling | How easily hair can be worked through during use | What adjustments could improve the conditioning feel? |
| Rinsing | Rinse time and remaining product feel | Is this the intended rinse-off experience? |
| Dry hair feel | Softness, smoothness, weight and residue | Which changes could address the concerns observed? |
| Fragrance | Scent character and perceived intensity | Can we review a different fragrance or intensity? |
| Dispensing | Whether the product leaves the container consistently | Has the formula been evaluated with the proposed final packaging? |
This table is a buyer feedback tool, not a laboratory test protocol or proof of product safety.
Before approving a sample, confirm its code, formula version and agreed specifications. Keep a record of what has been accepted and what remains open.
Formula and packaging decisions should be reviewed together.
Ask whether the manufacturer has assessed the proposed conditioner with the actual bottle, tube, pump or closure. A container used for early sampling may differ from the packaging selected for production.
Points to discuss include:
Also confirm who supplies each component. If you provide your own bottles, the manufacturer still needs to review whether they suit the formula and filling process.
A useful question to ask:
“Which packaging checks will be completed with the final formula and components before production approval?”
Ask what the quoted MOQ applies to: the formula, fragrance, filling size, packaging configuration or finished product.
For example, one conditioner in two fragrances or two bottle sizes may create separate production or packaging requirements. Do not assume that all variations can be combined into one minimum order.
Order quantity and filling size also affect the amount of product involved.
For a product filled at 250 mL per unit, the nominal finished-product volume is:
| Finished units | Fill per unit | Nominal total fill volume |
|---|---|---|
| 1,000 | 250 mL | 250 L |
| 3,000 | 250 mL | 750 L |
| 5,000 | 250 mL | 1,250 L |
Calculation: Units × fill volume ÷ 1,000 = total litres.
These are arithmetic examples, not manufacturing batch requirements or quotations. They exclude processing and filling losses. Volume in millilitres should not be treated as an equivalent weight in grams without considering product density.
At Gelan, the MOQ for bulk production starts at 1,000 units. The final minimum order quantity depends on the product specifications and packaging requirements. Confirm the applicable MOQ for each proposed conditioner variation in your quotation.
A useful question to ask:
“If we change the fragrance, bottle size or decoration, which minimum quantities would change?”
Compare quotations using the same product and packaging specifications.
A finished conditioner supplied in a labelled bottle and carton cannot be compared directly with a quote for bulk formula alone.
Use the following checklist to identify what each supplier has included.
| Cost item | What to confirm |
|---|---|
| Formula and manufacturing | Formula version, filling size and order quantity |
| Primary packaging | Bottle or tube, pump or cap, and any seal |
| Decoration | Labels, printing, finishes and artwork charges |
| Outer packaging | Individual cartons, shipping cartons and packing arrangement |
| Development and samples | Sample charges, revisions and courier costs |
| Testing and documentation | Agreed scope, deliverables and additional charges |
| Delivery | Shipping terms, destination and costs included or excluded |
Ask for one-time charges to be separated from recurring production costs. This makes it easier to understand both the first order and potential repeat orders.
A useful comparison considers the total agreed project cost alongside the number of finished, saleable units.
Ask how the manufacturer records the approved formula and checks production against the agreed specifications.
Depending on the project, relevant information may include product specifications, batch identification, finished-product inspection records and agreed test reports.
If a supplier refers to ISO 22716, ask which manufacturing site and activities its documentation covers. ISO describes the standard as guidance for the production, control, storage and shipment of cosmetic products. ISO 22716:2007
Questions to raise include:
Confirm the documents available for your specific project. A general company certificate does not establish that every product claim has been tested.
A production lead time may begin after formula approval, packaging confirmation, payment or another agreed milestone.
Ask the manufacturer to distinguish between:
Some activities may overlap, while others depend on earlier approvals.
Request a schedule showing the main approval points and outstanding requirements. Confirm how sample revisions, packaging changes or delayed artwork would affect that schedule.
A useful question to ask:
“What must be approved or received before the production lead time starts?”
Your final approval should bring the commercial and technical details together.
Confirm the formula version, packaging components, quantity for each variation, quotation scope, production schedule and agreed quality requirements. Record any unresolved items before authorizing production.
A clear brief and written approvals give both the brand and manufacturer a shared reference for the order.
Gelan supports private label and OEM/ODM haircare projects, including conditioner development, packaging coordination and manufacturing.
Our bulk-production MOQ starts at 1,000 units, with the final requirement confirmed according to the product specifications and packaging.
To discuss your project, share your target customers, product type, preferred texture, packaging direction and estimated quantity. We can review the requirements and confirm suitable options, MOQ and quotation details.
Explore Gelan’s Haircare Products or Contact Us About Your Conditioner Project.